Skip to content
Ask A Question
  • There are no suggestions because the search field is empty.

What hardware do I need to communicate to a GE-FANUC CC by Ethernet?

What hardware do I need in my PC or in my PLC? Communication between PLC and PC needs to be with Ethernet module in GE-FANUC or is directly in it's CPU.

A GE 90-30 PLC would need a GE CCM321 module for Ethernet communication. The PC only needs a standard Ethernet card. I would suggest you check with your GE distributor about what module is best for Ethernet communications with your device or at least check the GE Automation web site.

GE Fanuc website: http://www.gefanuc.com Some GE Fanuc 90-30 CPU's do have Ethernet built into the CPU, You can find out by looking a the manual for the CPU on the GE Fanuc website above.