![SWTB_logo_rgb_color_mode-wPadding-2000x961.png]](https://help.softwaretoolbox.com/hs-fs/hubfs/SWTB_General/Images/Press_Kit/SWTB_logo_rgb_color_mode-wPadding-2000x961.png?height=50&name=SWTB_logo_rgb_color_mode-wPadding-2000x961.png){kind=logo}
TOP Server
Documentation
- TOP Server Operating System Support
- TOP Server current version
- TOP Server v7.x Release Notes and Download
- TOP Server Documentation (PDF)
- TOP Server v6.x Release Notes and Download
- TOP Server v5.x Release Notes and Download
- How is TOP Server Licensed? Where can I read the EULA?
- TOP Server Installer File Hashes/Checksums
- Available TOP Server System Tags
- What Localized Languages does TOP Server V6 Support?
- TOP Server Logix Firmware Support by Version Release
- TOP Server Media Level Redundancy Support
- TOP Server OPC Data Access Certification
- BACnet Engineering Unit Conversion
- Are Microsoft security patches and service packs tested against TOP Server V5?
- Finding TOP Server V5 Driver Support and Maintenance Expiration Information
- Cable Creation for Telemecanique Uni-Telway
- What is the ECCN number for TOP Server?
Installation/Upgrade
- TOP Server V6 to V7 Upgrade Guide
- TOP Server v7 JSON Project File Changes
- Receiving -5006 Errors when installing TOP Server
- Problems Installing on Windows 7 64-bit
- TOP Server 6.x Installer Error "CreateProcess failed (266)"
- My TOP Server 5 Installation fails
- TOP Server Upgrade Best Practices
- TOP Server 6 Installer Not Trusted
- Considerations when Running TOP Server in the Cloud
- Installing Wonderware SuiteLink Common Components
- TOP Server 6.x Installer Crash - "Installer has stopped working"
- TOP Server - Installing new driver on currently Licensed System
- Running TOP Server in a Cluster
- TOP Server install crashes without an Error message
- TOP Server v6 Unable to connect to runtime service
- Change in TOP Server OPC ProgID in Version 6 - Can I still use the previous ProgID?
- TOP Server V6 Projects including drivers not installed
- Changing the TOP Server 5 SuiteLink Application Name
- Installing TOP Server on a secondary hard drive
- TOP Server Upgrade to get ABB Totalflow Driver for Existing Oil & Gas Suite License Holders
- TOP Server V5.4.131 - Known Issue - Service State Not Respected on Install
- TOP Server v5 Hardware Key on Windows XP Embedded Platforms
- Problem upgrading TOP Server
- How to Migrate from KEPServerEX to TOP Server V6
Licensing
- What can cause a Broken TOP Server License?
- TOP Server License Re-Registrations for Non-Support Holders
- [PDF] TOP Server Version 6 License Instructions - Internet Access
- [PDF] TOP Server v6 Hardware Key License Instructions
- [PDF] TOP Server V6 License Transfer
- TOP Server End User License Agreement (EULA) Detailed Agreement
- [PDF] TOP Server Version 6 Full Licensing Instructions
- [PDF] TOP Server Version 6 Licensing Instructions - No Internet
- How to Remove Hardware Key Certificates from your License Utility?
- TOP Server License Status Showing Broken or Cannot be Accessed
- Resolved: TOP Server 5.20,5.21 and 6.0-6.9 Hardware Key/Dongle Related issue with Windows 10 Build 19041,19042 (2004, 20H2 Releases)
- How to find your TOP Server Activation ID (V5 / V6 / V7)
- TOP Server - Error processed during activation: Cannot continue, the request is corrupt.
- TOP Server License Status showing Broken Binding
- Running TOP Server on a Virtual Machine
- Installing a TOP Server V5 Hardware Key
- ControlLogix Slave Ethernet Driver - Licensing for Existing AB Suite or Manufacturing Suite License Holders
- Error: Cannot perform support actions on inactive fulfillment record
- Online registration Center Error processed during activation: 7097:Incorrect request. Expecting ACTIVATION, but received request of type:RETURN
- Error: Expecting ACTIVATION, but received request of type: RETURN
- Error: Expecting RETURN or REPAIR, but received request of type: ACTIVATION
FAQs
- How do I set the Device ID for the Allen-Bradley FlexLogix Controller?
- System Platform 2023 installer with TOP Server v6.15 and later
- TOP Server - Authentication Required
- Does TOP Server require RSLinx?
- How to specify Data Type in Wonderware InTouch
- Reading Bit from DINT Array
- ControlLogix Three dimensional array support
- Static versus Dynamic tags
- ControlLogix Tag Addressing
- Modbus Addressing Offset
- Modbus Ethernet Encapsulation with Lantronix Co-Box
- Client Count Effects on Performance
- Accessing Bit in CS1 Work Area
- When to use @datatype in AVEVA / Wonderware for dynamic ControlLogix tags
- TCP Keep Alive setting in TOP Server DNP3 Client Ethernet driver
- TOP Server Polling Behavior
- ControlLogix Routing Path for Ethernet to Ethernet Routing
- RSLinx and TOP Server on Same Machine
- TOP Server Thread Safety
- Access custom macro variables on GE Focas CNC
- How to force a deactivated block to scan again
- TOP Server addressing TCP/IP Devices via Hostname
- Rounding errors in Quick Client
- How to handle when a BACnet object Present Value Does Not Change when written to
- Unable to Write to Input in ControlLogix
- What is the method used to connect Wonderware tags to the TOP Server?
- DB1 flow_time value returned is outside of expected range with my ABB Totalflow meter
- Modbus device tags shows as scientific notation in TOP Server Quick Client
- TOP Server DNP3 Client Ethernet Driver - Keep Alive interval setting
- Null values in Wonderware Historian Trend
- Built in IO tags for Micro 850 PLCs
- Reading Array Elements with TOP Server Client Drivers
- TOP Server IEC 61850 MMS Client Driver - Device generated tags showing bad quality
- TOP Server Administration Tool Window Task Scheduler
- How to access Siemens S7 PLC Function and InstanceDB (Data Blocks) when using Siemens S7 Plus Ethernet Driver
- DNP3 - Latch On Working, but Latch Off Not
- Start TOP Server V6 Runtime from Powershell
- Updated Behavior for _Error and _NoError system tags for Modbus TCP Ethernet driver in V6.11.764.0
- TOP Server Dynamic Addressing for OPC UA Clients
- TOP Server BACnet Object Name used for Tag Groups
- Forcing TOP Server to Automatically Register with SuiteLink Service after Machine Reboot
- How to request partial EFM history archives from ABB Totalflow meters
- Dynamic Addressing using the UA Client driver
- Accessing Help Documentation for the Configuration API
- TOP Server Virtualization Support
- I have multi-homed NICs in my PLC and now only the Console Session of InTouch Terminal Services can see SuiteLink data from TOP Server.
- Best Practices for Using/Implementing Watchdogs in TOP Server
- Unable to browse for items to import with the OPC DA Client Driver
- Viewing TOP Server OPC UA Wireshark Trace
- Wonderware ArchestrA displaying "Initializing" quality for OPC Connection instead of "Bad" quality
- My analog points in the TOP Server DNP3 driver do not update on an event poll or via unsolicited messaging, but they do update on an integrity poll.
- iFIX Connection to TOP Server V5.1 via PDB using Remote Desktop
- Maximum Modbus TCP Block Size
- Can a remote OPC connection be made to the TOP Server?
- Will TOP Server V6.6 work with Windows 10 IoT Enterprise LTSC?
- Do TOP Server Ethernet Drivers check the socket before they send?
- Does TOP Server support OPC .NET 3.0?
- Are Advanced Tags values retained across a restart of the TOP Server?
- Externally Triggered Event using GE EGD Driver
- Freezing Behavior when using as Serial Driver and USB-to-Serial Converter (Brand: Cables To Go / Model #: 26886)
- Getting Unexpected Data Values reading OpCode tables from Fisher ROC Floboss
- TOP Server problems reconnecting to S7-1500 after program download
- OPC Connectivity from SLC5/04 to app via WinCC OPC Server
- Remote connection of the DA Client Driver
- Using TOP Server v5.5 and before with Modbus Plus on Windows 7 and Server 2008
- Tag Count using Multiple OPC Hops
- Start OPC Quick Client with Specific Project
- TOP Server Siemens TCP/IP Ethernet Driver not closing connection
- Bit Masked Reads within the TOP Server
- TOP Server v6 - Quick Client will not auto generate tags that I can see in my configuration
- DNP Drivers: What is the definition of an event poll?
- Modbus Serial: RTS Control settings are greyed out
- DDE connection between TOP Server and Excel
- Processing Failed to Add Item Errors
- PLC Ethernet Module Models, Firmware & Settings affecting communications performance with ControlLogix PLCs
- Cannot write to _system tags that are read/write
- TOP Server problems on remote connection to server machine.
- My active tags are a lot less than the number of added tags.
- Deleted ControlLogix PLC tags still returning "Good" data
- Connecting an S7/200 to TOP Server over Ethernet
- UCON - Multiple lines of ASCII Strings
Error Codes/Messages
- TOP Server Error: Connection sharing plug-in failed to load due to lack of driver support
- DDE problems DMLERR_NOTPROCESSED 0x4009
- Failed Reads/Writes using Honeywell UDC Driver
- Access denied to user 'Data Client' requesting 'Dynamic Addressing' on Channel.Device"
- v5.2.134 - TOP Server Error When Opening License Utility
- "Unable to enable redundancy for the selected server" Error with TOP Server v5
- Mitsubishi Q-Series: Can read data just fine, but cannot write to any points
- I get an error while trying to write to a tag
- Omron Host Link Communication Error
- Error with PKTX card after a Frame Error (Not Recoverable)
- Using the same Communication Port and Modem for Multiple Channels
- I have created a tag export file in Hybrid Control Designer and TOP Server will not import it.
- Error: Device Returned Error Code EC1 = 44
- RSLinx must have UDP disabled when working with SoftLogix PLCs.
- Can't connect to TOP Server by SuiteLink while TOP Server is running as a service
- Unable to locate Driver Image Table
- Attempt to add item failed error from InTouch
- Error: 0x8501 (8501) Received from Device
- Trident PLC unable to write
- Multiple Omron PLCs Not Communicating Under Different Channels
- Attempt to add Topic failed error from InTouch
- Incuity Client stops polling TOP Server (Error 0x80004002)
- I can not re-open my large TOP Server 5 project when I save it as an XML file. How can I fix this?
- Problems connecting to GE Fanuc Multilin UR Relay with TOP Server GE EGD Driver
- Unable to start the Fanuc Focas Data Window Library services
- RESOLVED: TOP Server Version 6.15 - Issue Loading Large Projects
- User permissions required to run TOP Server
- Error "The Folder Path C: Contains An Invalid Character" when trying to run the TOPServer.exe file
- TOP Server Schneider M580 PLC - Bad Quality after Project Update
- TOP Server 6.x Installer Error "CreateProcess failed (1603)"
- Dynamic tags fail on Secondary when configured with Media-Level Redundancy in TOP Server
- TOP Server Maximum Connections – OPC DA and OPC UA
- How to clear TOP Server Trusted Storage: Failed to generate request [Trusted storage load failed]
- Issues Connecting AVEVA OIGateway to TOP Server via OPC UA with Encryption and Authentication
- Error when installing TOP Server V6.11 or later
- EFM Exporter indicates "No New Data" in the TOP Server Event Log Despite Known New Data in the Meter
- TOP Server V6.10 or Newer Configuration Crashes with Error "Server - Configuration has stopped working: A problem caused the program to stop working correctly. Please close the program".
- TOP Server - Configuration Client is not connecting to the Runtime Service
- Patch to Resolve Incorrect Values or Inaccessible Addresses with AutomationDirect DirectNet Serial in TOP Server V6.10.623.0
- TOP Server ControlLogix Warning Message: "Project online edit detected. Currently using Symbolic Addressing"
- Error when saving TOP Server Project File to JSON format
- TOP Server Runtime Crash with Wonderware Common/SuiteLink components rev 3.0 and newer
- Permissions Issues when accessing the TOP Server 6.7 Configuration
- Getting Error "Connection to InTouch failed. Server runtime process must be configured for interactive mode" when using the TOP Server InTouch Client driver.
- TOP Server Error: Unable to connect to the event logger service
- BACnet Error - Request rejected by device. Reason: 9 (Unrecognized service).
- Enabling Online Writes in PLC with TOP Server Mitsubishi Ethernet Driver
- Using Application Report Utility - TOP Server V5.16 with V4 Side-by-Side Install Information
- TOP Server Writes Not Working from SuiteLink Client (Reads are Successful)
- Communication issues with Allen-Bradley ControlLogix Firmware 20.19
- S7-1200 and S7-1500 Configuration for Communication with TOP Server using Native Siemens Ethernet
- Disable TOP Server Runtime Service Dependency on Windows Telephony Service
- Problems Connecting to the TOP Server DA interface after applying Meltdown/Spectre patches
- Windows Update caused error messages CIP Error 0x07E4: Could not resolve data type "x" for (tag name). Setting to Default Type 'y'
- I can't import my Logix database from my ControlLogix device
- Disabling Address Block Deactivation for Modbus Ethernet or Modbus RTU Drivers
- TOP Server Administration Icon Error - "Invalid or missing user information"
- Unable to Load Project
- Resolved - TOP Server V5.14.491.0 Modbus TCP Ethernet Driver Block Size Issue
- Error connecting with IDS Driver
- UA Connection Problems to Opto22 Groov after TOP Server upgrade
- Error using USRobotics Modem with S7-200
- Unable to Connect TOP Server Version 5 with Wonderware
- Unable to Add Tags for PMC Data Addresses for GE Focas Ethernet (v5.1.71)
- Parse Error importing SNMP MIB file
- DF1 Comm Issues
- I get an error when I save the sample simdemo.opf project
- How to get the InTouch Client Driver reading successfully
- iFIX returned error 'I/O address entered was rejected by the Server.'
- Tag Validation and Error Handling with Synchronous Device Reads and the TOP Server Beckhoff TwinCAT Driver
- TOP Server ODBC Client Driver Fails to Auto-generate Tags from my SQL Database
- "Max. sequence number of 0 reported from device" with ABB Totalflow
- Bad Data Quality with 32-Bit Integers In System Platform 2014 R2 SP1
- Error: NetLink Error Code 0x12 (12)
- TOP Server UA Certificate validation issue after 5.18 upgrade (Solved)
- Device Not Responding Error
- "Error reading date and time, history record will not be logged" with BARTON Flowmeter and Enron Modbus Driver
- TOP Server Connection Sharing Warning Message
- Syntax Errors Logging from Advanced Simulator to SQL using TOP Server DataLogger
- Getting bad quality on tags using DNP3 driver but see communication in diagnostics
- UDP Communications Failing after a period of inactivity
- CIP Error=0x08 with ControlLogix Ethernet Driver V5.5.94.0
- Moved TOP Server Config - changing Network Adapter List - network adapter is not found
- Server error code descriptions
- TOP Server Unable to get data from SNMP Service installed on Windows Vista or newer Machine
- GE Fanuc 90-30 and 90-70 Connectivity Issue on Newer OS
- TOP Server not communicating until programming software has been connected
- Troubleshooting S7 Ethernet connections
Project Configuration/Management
- TOP Server DNP Background and Best Practices
- Importing/Exporting Certificates in TOP Server
- Native Tag Database Import Required with Allen-Bradley ControlLogix Server Ethernet Driver
- How to create a virtual network
- What are some limits on the fastest update rate at which I can get data from a DNP device?
- Common TOP Server Driver Ports (Channel & Device)
- Connectivity to Remote Beckhoff TwinCAT PLC using NAT (Network Address Translation)
- TOP Server V6 Project Backup Configuration and Directory
- Enabling and Disabling the OPC UA server interface in TOP Server V6.x
- TOP Server Project File Limitations
- UCON Driver - How to connect to an unsolicited device through Ethernet encapsulation when the device does not initiate the socket connection
- How TOP Server loads .opf project files during Runtime
- TOP Server S7 Plus Ethernet Driver - Secure PLC Communication Certificate
- TOP Server Product Support Lifecycle Policy
- TOP Server Media-Level Redundancy Operating Modes
- How to Uninstall TOP Server V6
- Multiple Configuration User Access for TOP Server V6.12
- Installing TOP Server Patches
- How to Upgrade your TOP Server Version 5 to Version 6
- Monitoring Remote Windows computers via SNMP with TOP Server
- EFM Pointer Backup and Restore Recommendations
- How to set up TOP Server Logs for Extended Data Store
- Changing TOP Server ProgID in newer versions of TOP Server - Can I still use the Version 4 ProgID?
- TOP Server V5 Project Backup Directory
- Issues with DNS Host Name Resolution and TOP Server Device ID formatting
- Zero-based addressing and migrating from Wonderware MBTCP DAS Server to TOP Server
- Modulo-10000 Dynamic addressing in the TOP Server
- BACnet/IP Devices per Channel Limit - Workaround
- Migrating from TOP Server V4 DNP Suite to TOP Server V5/V6 DNP Suite
- How to Upgrade TOP Server V4 to TOP Server V6
- Can a TOP Server V5 open my V4 project file?
- TOP Server Dynamic Tag Addressing Syntax
- Upgrading TOP Server version 4 Project (.opf) Files
- Can the TOP Server run on a particular NIC card?
- Testing Connections with the TOP Server
- How to set OPC filters in TwinCAT symbol files
- EFM Time Synchronization Configuration
- Omron Ethernet TOP Server talking to more than 1 Omron PLC
- Can I keep TOP Server from running as a Service?
- Setting Deadband Value in TOP Server
- How to access the Alias Map in TOP Server Version 6
- How to Format the Device ID for a Logix Family Device in TOP Server (Local Connection / Data Highway Gateway / ControlNet Gateway)
- ControlLogix with ControlNet Routing Path
- Controlling Modem Communication from Client
- Multihoming Network Adapters for Optimized BACnet Communications: Best Practices
- How do I control or find the project backups in TOP Server V5?
- How to maintain correct format in Excel when importing Addresses exported from TOP Server?
- Writing to tags in the UCON driver
- Specifying TOP Server Default Startup Project
- Gateway limits connections to TOP Server
- How to show auto-generated aliases in TOP Server V6
- Required Omron FINS Ethernet Module Settings
- TOP Server Path construction to ControlLogix
- Eliminating BACnet segmentation
- Temporary Files created by Extended Data Store
- Specifying the project file TOP Server should load on startup (Starting TOP Server V5.2)
- Using Scan Rate Override in Alias Map
- How do you import an MIB file into the SNMP Driver?
- Controlling TOP Server V6 Tree View options
- TOP Server BACnet Driver with 254+ Devices - Setting a Static IP
- How to access remote I/O from DeviceNet scanners in a modular SLC Device
- ControlLogix Protocol Modes
- Write Access to DB2 Characteristic Items
- Automatic Tag Generation using Concept
- Can I dynamically change the IP address of my device in the TOP Server?
- DNP3 Event Class 0 in TOP Server
- DDE Client Connections and/or DDE Client Driver on Windows XP Professional / Server 2003
- DDE Client Connections and/or DDE Client Driver on Newer Windows Operating Systems (Win 7 & Later)
- How to read Modbus Registers that return one 32-bit register instead of two16-bit registers for 32-bit data types
- Modbus Unsolicited Serial Driver: tags have good quality before they've been written to by the Modbus client.
- Omron FINS CP1E, CP1H, and CP1L device selection
- How to Read Signed Magnitude (16-bit)
- Auto-dial Multiple PLCs using a single Serial Modem
- What will be imported in TOP Server from an L5K file?
- TOP Server tags show wrong value after deleting and recreating a UDT
- NIO interface issue in 5.4 (default data type handling)
- Importing Tags or Creating tags quickly - Ways to speed Configuration
- InTouch Client Driver and TOP Server as a Service
- Can I set TOP Server to open in Configuration Mode and not Runtime mode?
- Can TOP Server run as a service?
- In the DF1 driver, how many bytes long are the Large and Small Block Request Size settings?
- InTouch to iFix communications
- TOP Server Modem _Statistics tag is not available.
- TOP Server Quick Client Performance Tips
- Generation of Simulation Data
- Communication with Multiple Mitsubishi Devices
- Creating ControlLogix Tag Database
- How do I keep TOP Server from creating a new alias map when the server is started?
- PowerLogic Port used by TOP Server
- Effects of Changing User Access Rights - TOP Server
Device and Protocol Compatibility
- AB Powermonitor 3000 Driver
- TOP Server to Lantronix UDS-10-IAP
- TOP Server Siemens Suite Communicating with an S7-1200 (v5.2 and older)
- TOP Server Connectivity for a Yaskawa U84 PLC
- Which Mitsubishi driver do I need to communicate with a Mitsubishi FX2N64MR?
- Does the DH+ Driver Support the AB1784-U2-DHP Card?
- Can TOP Server Connect to MicroLogix 1400 (1766) PLCs?
- GE FOCAS1 Ethernet Driver
- Will the InTouch Client Driver work with Wonderware InControl?
- Using TOP Server with an Ethernet-Modbus Plus Bridge
- Communication with a Moeller PS4 PLC
- Allen-Bradley 1761-NET-ENI series C/D - compatibility with TOP Server ControlLogix Ethernet driver
- T1H-DM1E Compatibility with Automation Direct Driver Suite
- TOP Server MicroLogix 1200 Support
- Supported Logix Firmware Revisions (By Device Model)
- Can the Modbus ASCII driver connect a TI545 to Wonderware.
- Can the Server talk to GE Fanuc CPU 788?
- TOP Server and Mitsubishi Q Series Controllers with built in Ethernet Ports
- Configuring TOP Server to communicate via an AN-X-DHP Ethernet-DH+ Gateway
- SoftLogix 5800 Support
- TOP Server DF1 connection to a ControlLogix
- TOP Server ODBC Client Driver with SQL Views
- MicroLogix Models Supported in TOP Server ControlLogix Ethernet Driver
- Mitsubishi A, ANA & Q Series Ethernet Server
- Mitsubishi (MELSECNET/H) with Fiber Optic card
- Connecting HMI to Horner XLe
- Oracle ODBC Driver with TOP Server V6
- OPC Server for ERO Electronic Devices
- Making a DDE Connection to the TOP Server
- Supported BACnet/IP Objects
- TOP Server compatibility with ABB's AC 800M Controllers Using MMS Protocol over Ethernet
- Can TOP Server communicate with the Siemens PLCSIM Advanced Software?
- Accessing 64-bit data with the Modbus TCP/IP Ethernet Driver in TOP Server
- TOP Server Modbus Plus PCIe-85 Adapater (416NHM30042A) Support
- Connecting to Eurotherm with DF1
- Support for Automation Direct Do-More H2 Series
- Permission Denied Error when communicating with Allen-Bradley ControlLogix (Firmware 20.19 or 20.57)
- Does TOP Server Support Communications with the Siemens ET 200S CPU?
- Connectivity for Hilscher Interface Cards
- What IMMs (Injection Molding Machines) can the TOP Server EUROMAP 63 driver work with?
- How can I connect to a Yokogawa YS1700 controller?
- Connectivity for SattBus
- Does TOP Server support the Allen-Bradley 1784-U2-DHP USB-to-DH+ cable?
- TOP Server with Rockwell RSLogix Emulate 5000
- Alternative Methods for Rockwell Allen-Bradley Data Highway (DH+) Connectivity for TOP Server V6.10 or newer
- Does TOP Server support the Omron NX Series of controllers?
- Modbus Device Communication Initiation via Modem
- BACnet/IP - Device Compatibility
- TSXCUSBMBP USB Adapter Compatibility with TOP Server
- Master Controller Firmware Requirements - ControlLogix Server Ethernet Driver
- Unicon Modbus Modem Support
- Can the TOP Server Modbus Ethernet driver communicate with a TSX Series PLC with TSX ETZ 410/510 module?
- Can TOP Server connect directly to Allen-Bradley/Rockwell Flex I/O?
- Can I communicate with any PLC on the Uni-Telway Network or only the master using your driver?
- TOP Server Communicating with Allen-Bradley PowerFlex Device
- Modbus Plus Unsolicited Support
- Known WITS Level 0 Devices Supported
- InTouch Client Driver work with InTouch version 7.11 to 9.5?
- TOP Server FINS Ethernet Communications with CP1 Series Omron PLCs
- Support for Panasonic FP-X
- Siemens Simotion controller
- Does the TOP Server support the "2572-A Fast Ethernet TCP/IP Adapter" from CTI?
- Accessing SLC505 via ControlLogix Gateway
- Does TOP Server have a ControlNet driver for ControlLogix?
- Ethernet Encapsulation with GE Serial Driver
- Barcode Scanner Data into Wonderware Clients
- Connecting to an AB Power Monitor 3000 with TOP Server
- Communication with Motorola MOSCAD RTUs
- TOP Server Support for Siemens LOGO! 8
- Does the TOP Server GE Fanuc Suite Support PAC Systems PLCs?
- CompactLogix over DF1
- Using TOP Server to communicate with PLC 5 via a ControlLogix Gateway
- GE Fanuc Focas2 Ethernet
- TOP Server Communication with Mitsubishi FX5U (iQ-F Series) PLCs
- Do you have a TOP Server driver to communicate to the Keyence "KV" series of PLCs?
- Which Siemens CP cards do the TOP Server TI505 Drivers support?
- TOP Server support for Siemens S7 Redundant Controllers
- What CODESYS devices has the TOP Server CODESYS Driver been tested against?
- IEC61850 Standards supported
- OPC Server for IEC 61131-3
- TOP Server Support for BARTON Flowmeters
- Support for ABB Devices
- Support for RS422 port on Simatic/TI 500 series CPUs
- I/O server supporting Toshiba V3000 PLC
- Communicating with a Simatic HMI Comfort Panel via OPC UA
- Wonderware server for A&D GX-200 scale.
- ODBC Client Driver with Firebird database
- Can TOP Server Modbus Ethernet Talk to a Moxa NPort6110 ?
- Does TOP Server support the Beckhoff TwinCAT CX family?
- ControlLogix Ethernet Driver and RSLogix Firmware Updates
- Honeywell DCS and 620 Series OPC Server
- TOP Server RS422 with PLC Direct Daisy Chain
- Modem Connection to Siemens PLC
- TOP Server Toshiba Ethernet support for Toshiba V-Series
- Allen-Bradley Flex I/O Support
- Does the TOP Server TI/Simatic Suite support connectivity to the CTI2500-C200 with built-in Ethernet port?
- Allen Bradley USB DH+ adapter 1784-U2DHP
- Does the TOP Server BACnet driver act as a Client or Server on the network?
- OPC Server for Cameron Measurement Systems Scanner 3100
- Omron Baud Rate Support
- What cable I need to connect a Telemecanique TSX17 With a PC?
- Will the Modbus plus driver work with the PCI bus cards?
Application Notes
- Video: TOP Server 5 License Transfer (4:18)
- Configuring the TOP Server for OPC UA
- [PDF] How to create an Application Report in TOP Server v5
- Video: TOP Server V6 License Transfer or Release (3:52)
- Video: TOP Server Quick Start for Siemens TCP/IP Ethernet (6:23)
- Video: TOP Server V6 License Registration (6:30)
- Video: TOP Server Quick Start for Allen-Bradley ControlLogix Ethernet (8:51)
- Video: TOP Server Quick Start for IEC 60870-5-104 (6:40)
- TOP Server Quick Start for BACnet/IP
- U-CON Training Tutorial
- Video: TOP Server Migration V5 to V6 (2:57)
- Video: TOP Server V5 Quick Start for Modbus (5:41)
- Webcast: Integrating Non-Standard Devices with TOP Server UCON
- Video: TOP Server V6 Quick Start for Modbus (18:06)
- Getting Started with TOP Server and Modbus Plus
- Using Cimplicity to Connect to TOP Server
- How to configure TOP Server for use with Phone Modems
- Guide to Using TOP Server Channel Diagnostics
- Silent Install for TOP Server V5.x/V6.x
- Connecting OSI PI Client to TOP Server
- Using TOP Server with Proficy iFix via an OPC Interface
- Video: TOP Server 5 License Activation
- How to read data from a text file in the ODBC driver?
- Using the TOP Server Simatic/TI 505 Ethernet Driver
- Connecting Citect to TOP Server 5
- Using TOP Server V6 with Wonderware System Platform Using Suitelink
- Connecting ICONICS Genesis to TOP Server v5
- Interactive Guide: TOP Server Troubleshooting
- TOP Server 5: Scheduler Plug-In Setup Guide
- Optimizing ControlLogix Communications Whitepaper
- Using InTouch with TOP Server V5 via FastDDE and SuiteLink Connections
- TOP Server DNP Master Ethernet Driver - Advanced Operations - CROB Commands
- Using InTouch with TOP Server V6 via FastDDE and SuiteLink Connections
- Using TOP Server with the GE Proficy iFix PDB Interface
- Using the TOP Server Siemens TCP/IP Ethernet Driver
- Connecting TOP Server to Mitsubishi FX3U with FX3U-ENET-ADP Module
- Understanding and Using TOP Server Advanced Tags Plug-in
- How to Connect Ignition's UA Client to TOP Server
- KEPServerEX IoT Gateway configuration for Microsoft Azure's IoT Hub
- Video: How to capture channel diagnostics in TOP Server v5 (2:00)
- DNP3 Connectivity to AB MicroLogix 1400
- Video: Using TOP Server with AVEVA (formerly Wonderware) InTouch (4:18)
- TOP Server UA Certificate Exchange
- Video: Using TOP Server with Wonderware System Platform via Suitelink (9:34)
- Video: Using TOP Server with AVEVA (formerly Wonderware) System Platform via OPC DA (10:11)
- Video: Connecting Your HMI or SCADA to an RTU via DNP3: Introduction (8:47)
- Video: Connecting Your HMI or SCADA to an RTU via DNP3: Live Demonstration (8:36)
- EFM and Real Time Data Collection Best Practices with Telemetry Systems
- TOP Server V6 on Windows 10 - Disabling Flag Notifications during Trial Mode
- Understanding & Making Configuration Choices for the ControlLogix Ethernet Driver
- Using TOP Server with Wonderware System Platform via OPC
- Using TOP Server with WinCC V6
Modbus Errors
- Modbus Exception Code 114 Received from the Connected Modbus Device
- Modbus Device Exception Codes
- Modbus Exception Code 111 Received from the Connected Modbus Device
- Modbus Error: Channel Diagnostics Show TX (Transmit) but Not RX (Receive)
- Modbus: Trouble communicating through a Modicon/Schneider BM85 Modbus bridge
- Communications Issues with Hilscher Modbus Plus Cards on Modbus Plus Networks
Features
- Integrate the Rest of Your Devices with the U-CON & CID Drivers
- Bring in Data from Legacy DDE Servers, Serve Data to DDE Clients
- Using TOP Server with Visual Studio .NET
- OPC Historical Data Access Server
- Using Multiple Channels to Optimize Performance
- When Simulate Device is enabled in TOP Server, both clients must have the same update rate in order for a value written by one client to be read by another.
- How can I monitor how many tags are being requested from my Client application?
- Does TOP Server support multiple CPUs?
- Can the TOP Server perform mathematical calculations on my tag values?
- Can I change the timeout settings in TOP Server from my client application?
- Can I switch between redundant networks or serial lines in TOP Server?
- Can I monitor the connection to my device with the TOP Server?
- Can I scale the value of my tags?
- Does the TOP Server support Auto Demotion?
- Does TOP Server support serial modems?
- Can I use TOP Server with a serial to Ethernet converter?
- Can I use a DNS name or hostname instead of an IP address in the TOP Server?
- Can I change the TOP Server configuration without stopping runtime?
- Connecting iFix to TOP Server V5
- Connecting my Historian to TOP Server V5
- Connecting an HMI to TOP Server V5
- Does TOP Server V5 work with Terminal Services/Remote Desktop?
- Using TOP Server with Windows Terminal Services
Addressing
- Accessing Local Variables in Micro800 Controllers
- I need to access multiple GE Fanuc EGD devices that are using the same producing exchange #.
- How to Configure Multiple Update Rates for a Device when using AVEVA (formerly Wonderware) Suitelink/DDE
- Using Modbus Alias Addresses with the Triconex Ethernet Driver
- Addressing ControlLogix String Tags from InTouch via TOP Server Allen-Bradley Suite
- Using Applicom TSX-Premium Addressing with TOP Server Modbus Suite
- Can I use Dynamic Tag addresses with the TOP Server OPC UA Client Driver?
- Is there a Performance Difference with Static vs. Dynamic Tags
- Modbus: Item address changes to 6 digits.
- How are Arrays addressed in drivers like Modbus and Siemens?
- Modbus addressing long/float in Samba SM35-J-T20 device
- Modbus addressing long/float in GE Multi UR Model T60 firmware 4.91
- TOP Server GE CCM Protocol Addressing
- TOP Server Addressing Different than Honeywell Manual
- Bit Addressing using the S7 MPI Driver
- Accessing Arrays in ControlLogix PLC
- Brackets and Underscores in ControlLogix Tags
- Accessing Bit from Modbus Word
- TOP Server BACnet Clearing an Overwrite on a Priority 8 (Manual) data point
- TOP Server Real-Time Scheduler Plug-In - Available System Tags
- Problems setting Bits in Modbus
- TOP Server Fisher ROC Plus Ethernet/Serial Drivers Addressing Syntax
- Capturing Spontaneous and Cyclical transmissions in the TOP Server IEC 60870-5-104 driver
- GE Symbolic Variables Access for Discrete Arrays - Performance Optimization
- You can read value even if the Object is not supported
- Accessing wrong bit with Siemens S7-200 PPI driver
- TOP Server with S7 MPI reading Floats
- Monitoring PLC Communication in TOP Server
- Modbus Addressing Using the TOP Server Modbus Suite
- Read Only Access When Dynamically Addressing Booleans
- Consuming DTL in TOP Server (S7-1200)